> ## ⚠️ Unilighter Solo is not available for sale yet
> This documentation is for early development devices provided to a small number of trusted people. The software and interface may change during development.

## Connect to Solo

1. On your phone, tablet, or computer, connect to the Wi-Fi network **Unilighter-Solo**.
2. Enter the standard Wi-Fi password: **unilighter2026**. If your device says the network has no internet access, stay connected.
3. Open **[http://solo.unilighter.cc](http://solo.unilighter.cc)** in a browser. You can also use **[http://10.10.10.10](http://10.10.10.10)**. If the domain does not open, use the IP address. Enter **http://**; Solo does not use HTTPS on its local network.

## Start page

The start page has a **Launch console** button that opens the lighting console. It also links to the online documentation and Solo product information; those links require an internet connection.

The **This Solo** panel shows the firmware version, device ID, IP address, uptime, and reason for the last restart. Open **Technical journal** to read recent device messages; use **Refresh** to reload them. The journal can include messages from before the previous restart when that history is available.

## Using the console

Solo runs the Unilighter console in your browser and sends DMX directly from the device. It supports **one DMX universe**. The Solo version does not include the stage visualizer.

Projects and fixture profiles are stored on the Solo device. Use **Save** in the console and check the **Saved on Solo** indicator to confirm the project was written. **Export backup** downloads a copy of the project and its stored fixture profiles, which you can keep or import in another browser.

The console also provides **Blackout** and **Restore output** controls. Keep the browser open while running a show; prevent the device screen from sleeping.